40’HQ Dangerous Goods Container

A 40ft high cube container built specifically for storing and moving drums, IBCs and other packaged dangerous goods. One full long side opens for loading; the other three faces are closed wall panels. The floor is a hot-dip galvanised steel grating laid over a bunded steel tray, so anything that leaks from a drum stays inside the container instead of running out of the door. Thirty-two louvred vents give continuous cross-flow ventilation while keeping rain out.

The shell is SPA-H weathering steel — the same corrosion-resistant grade used for marine containers — finished in acrylic paint with a bitumen coating on the internal understructure, where spills collect. Lifting is by the eight ISO corner castings, the forklift pockets or the top lift points, and the frame is designed to be lifted fully loaded. An optional CSC plate with classification society certification lets the unit travel as a certified freight container rather than as break-bulk cargo.

Typical use: a permanent chemical store at factories, terminals and paint shops; a fuel and lubricant store at mine sites and remote camps; a portable hazmat store on construction projects. Because it sits on a standard ISO footprint, it can be handled by ordinary container equipment and repositioned when the site moves.

Additional information

Configuration

40 ft high cube, ISO series 1 freight container

External dimensions

12,192 × 2,438 × 2,896 mm (L × W × H)

Shell material

SPA-H weathering steel (Corten grade)

Side access

One full long side opens; remaining three faces closed wall panels

Walls

Steel wall panels, uninsulated as standard

Ventilation

32 louvred vents — 16 door-side long wall, 8 opposite long wall, 4 + 4 end walls

Floor

Hot-dip galvanised steel grating 303/30/50 over a bunded steel tray

Spill containment

5,000 L, formed by ~210 mm deep bottom cross members

Bund drain

Drain valve and pipework in Q355B

Paint system

Acrylic topcoat, external; bitumen coating to internal understructure

Lifting

8 ISO corner castings, forklift pockets, top lift points; designed for lifting fully loaded

Load rating

18 t dynamic / 24 t static

Locking

Container door locking bars plus additional internal lock set

Certification

Optional CSC plate with classification society certificate

Branding

Unbranded as standard; customer logo on request

MOQ

1 SET

Full side access

The whole long side opens, so a forklift can set down a row of drums or IBCs in a single pass — no pushing pallets down a 12 m tunnel.

5,000 L spill containment

The bund is formed by the floor structure itself, roughly 210 mm deep, so containment takes no extra footprint. Enough volume for a 1,000 L IBC to empty completely with margin left over.

32 louvred vents

16 on the door-side long wall, 8 on the opposite long wall, 4 on each end wall. Cross-flow ventilation with rain protection — no power, no moving parts.

Galvanised grating floor

Hot-dip galvanised, dense 303/30/50 mesh. Lifts out for cleaning, inspection and repainting of the bund beneath.

Secondary internal locking

An additional lock set inside the doors, independent of the external locking bars.

Built to be lifted loaded

8 ISO corner castings, forklift pockets and top lift points; frame rated 18 t dynamic / 24 t static.

SPA-H weathering steel

Corten-grade shell — the right choice for outdoor service in coastal, humid and tropical climates.

Bund drain as standard

Q355B drain valve and pipework for controlled emptying and wash-down of the containment tray.