3000L stainless steel tank
  1. Home
  2. »
  3. Custom stainless steel tanks
  4. »
  5. What’s the specification for a 3000L stainless steel tank?

Table of Contents

Picture of Ivy Wang

Ivy Wang

Hi, I‘’m Ivy Wang, Co-Founder of Leeta Metals. I've been in stainless steel IBCs and custom shipping containers for more than 10 years. I'm glad to share useful industrial knowledge with you. If you need any custom solutions, please feel free to contact us any time!

What’s the technique specification of a 3000L stainless steel tank?

A 3,000 litre stainless steel IBC sits right at the top of what an intermediate bulk container is legally allowed to be. If you are moving up from drums, replacing a 1,000 L tote, or specifying bulk storage for a food, chemical or water process, the question is rarely “which tank is cheapest” — it is “which tank fits my floor, my forklift and my product”. This page sets out the dimensions, weight and build details of our 3,000 L centre-drain stainless IBC, and explains the two limits that catch most buyers out.

In short

  • Overall envelope: 1,800 × 1,096 × 1,944 mm (L × W × H)
  • Body: SUS304, 3.0 mm cold-rolled 2B, 2.5 mm minimum after forming
  • Tare approximately 385 kg; stackable two high; two-way fork entry
  • 3,000 L is the legal ceiling for a UN-marked IBC — no upward tolerance is allowed
  • At the same 4,170 kg gross, maximum product specific gravity falls from 1.86 to 1.26

Dimensions at a glance

Here is our 3,000 L unit next to the 2,082 L tank it was developed from. The 3,000 L is not a scaled-up shell — the cross-section is identical and only the length changes, which is why the fittings, the manhole and the base frame all stay exactly the same.

Parameter 3,000 L 2,082 L
Nominal capacity 3,000 L 2,082 L
Overall length × width × height 1,800 × 1,096 × 1,944 mm 1,249 × 1,096 × 1,944 mm
Manhole diameter Ø570 mm Ø570 mm
Tare weight ≈385 kg 294 kg
Payload at SG 1.2 3,600 kg 2,498 kg
Maximum gross weight 4,000 kg 4,170 kg
Stacking test load (1.8 × gross) 7,200 kg 7,506 kg
Working pressure Atmospheric (vented) Atmospheric
Working temperature −20 to +50 °C −20 to +50 °C
Body material SUS304, 3.0 mm SUS304, 3.0 mm
Fork entry / stacking 2-way / 2 high 2-way / 2 high

Figures for the 3,000 L unit are indicative and confirmed against the final signed drawing. Tare and gross weight depend on the fittings specified.

The drawing

3000L Stainless steel tank dimension
3000L Stainless steel tank dimension

 

Why 3,000 litres is the practical ceiling

Under the UN Model Regulations and the IMDG Code, an intermediate bulk container may not exceed 3 cubic metres. That is not a guideline or a manufacturer preference — it is the definition of the category. Above 3,000 litres, the packaging stops being an IBC and becomes a portable tank with an entirely different rulebook, test regime and cost base.

The consequence is easy to miss. Stainless tank nameplates normally declare capacity with a manufacturing tolerance, for example “2,082 L, +5%”. Apply that habit to a 3,000 L design and the declared figure becomes 3,150 L — which is non-compliant. A 3,000 L IBC therefore has to be rated at a hard 3,000 L with no upward tolerance, and the factory fill test must verify that it cannot exceed it. If a supplier quotes you a “3,000 L IBC” with a plus tolerance, ask what the certification actually says.

Three ways to reach 3,000 litres

There is no single correct shape. Each of these reaches 3,000 L, and each is right for a different site.

Length extension — 1,800 × 1,096 × 1,944 mm

The most common choice. Keeps the 1,096 mm width, so two units still load side by side in a 20′ container, and the 1,944 mm height keeps two-high stacking and standard container transport.

Square plan — 1,400 × 1,400 × 1,944 mm

For square bunds, round layouts and tight corners. Lightest of the three, but 1,400 mm will not load two across, so freight per litre rises.

Same footprint — 1,249 × 1,096 × 2,630 mm

Only when floor space is fixed and the tank never ships again. At 2,630 mm it exceeds the internal height of a standard 20′ container, and a tall narrow empty tank tips more easily.

A 20′ GP container has roughly 5,898 mm of internal length, 2,352 mm of width and 2,393 mm of height. Those three numbers decide more IBC layouts than any catalogue does.

Weight, payload and specific gravity

This is where a 3,000 L tank earns its caution. Gross weight is capped by the base frame, not by the body, so the same frame that carries 4,170 kg on a 2,082 L tank also carries 4,170 kg on a 3,000 L one. But there is 44% more liquid inside, which means less room for dense product.

Specific gravity Payload Gross / stack test
1.0 — water 3,000 kg 3,385 / 6,093 kg
1.2 — process liquid 3,600 kg 4,000 / 7,200 kg
1.5 — caustic, acids 4,500 kg 4,900 / 8,820 kg
1.8 — dense chemical 5,400 kg 5,785 / 10,413 kg

Stack test load follows the rule in the UN regulations: 1.8 × maximum gross weight. Above SG 1.26 the base frame and corner posts have to be uprated — a standard frame will not carry it.

Do you actually need UN certification?

A lot of buyers assume they do, and pay for it unnecessarily. UN marking under 31A/Y is what allows the tank to travel as dangerous goods packaging — it is what a freight forwarder or a port inspector looks for. It requires a design type approval and a test programme covering bottom lift, top lift, stacking, leakproofness, hydraulic and drop tests, which typically adds four to six weeks.

If the tank is going to sit in a fixed installation — a dosing station, a process line, a rainwater or wastewater system — and will never be shipped as dangerous goods again, the marking buys you nothing. The identical tank can be built unmarked: same sheet thickness, same welds, same fittings, no approval lead time. It is always worth asking the question before the specification is frozen.

Frequently asked questions

How big is a 3,000 litre IBC tank?

Ours measures 1,800 mm long, 1,096 mm wide and 1,944 mm high overall, with a Ø570 mm manhole. That envelope fits a standard 20′ container two units across and three deep, six tanks per container, and allows two-high stacking in a warehouse.

What is the maximum capacity of a UN-approved IBC?

3,000 litres (3 m³). That is the definitional limit in the UN Model Regulations and the IMDG Code. Anything larger is classified as a portable tank and falls under different requirements.

Can a 3,000 litre IBC be stacked?

Yes, two high, provided the base frame is rated for the gross weight underneath. The stack test load is 1.8 times the maximum gross weight, so a 4,000 kg gross tank is tested at 7,200 kg — roughly two and a half filled tanks bearing down on one frame.

What is a centre drain IBC?

An IBC with the outlet at the lowest point of a sloped floor, under the centre of the tank, rather than at one end. It drains completely without tilting, wastes less product and reduces cleaning time between batches.

What does 1,000 WOG mean on a ball valve?

1000 WOG is a valve pressure rating: 1,000 psi cold working pressure, suitable for water, oil and gas service. The tank itself is atmospheric — the WOG figure describes the valve, not the vessel.

Why must the tank be vented before discharge?

A closed tank being emptied by gravity creates negative pressure inside. The shell is designed for a liquid head, not for external pressure, so a strong enough vacuum will deform or collapse it. Open the manhole or a vent first, every time.


Specifying a 3,000 L tank?

Three answers let us size it correctly on the first pass: the maximum footprint your bund or rack allows, the maximum overall height your door or roof permits, and the specific gravity of the product. Send those across and we will come back with a dimensioned drawing and a firm price.

We manufacture stainless steel IBCs in SUS304 and SUS316L, from 500 L through to 3,000 L, for food, chemical, water and process applications — with or without UN marking, depending on where the tank is going.

Get A Better Solution Now

Our Sales Normally Reply Within 6 Hrs