2,200L Bund 20’HC DG Container

Most chemical storage fails not at the drum, but at the floor underneath it.

This unit is a standard 20ft high-cube container frame — same footprint, same corner castings, same trucks — but built around a welded steel bund instead of a flat deck. Any leak that gets past a drum or an IBC lands in 2,200 litres of sealed containment, not on your slab, your yard or your drainage.

The goods never sit in the sump. They sit on a removable hot-dip galvanised grating deck, so a pallet truck or forklift can load straight in, spills drop through the grid, and cleaning is a matter of lifting two or three grating panels out and hosing the base down.

Because it is ventilated rather than sealed, it suits products that give off vapour — solvents, paints, inks, thinners, lubricants — where a closed box would simply concentrate whatever the drums release. Louvre panels at both high and low level in each door leaf give a constant cross-flow, without letting rain in.

Handling is deliberately boring: four ISO corner castings for a standard spreader or crane, two fork pockets at the base for a forklift, and four adjustable jack legs so the whole thing can be levelled on a yard that is not level — which is most yards.

It ships as a 20ft unit, which means no special freight class, no over-dimensional permit, and no argument at the port.

Additional information

Product type

bunded storage container, for chemical goods, dangerous goods

ISO size code

25G2 — 20ft high cube, general purpose frame

External length x width x height

6,058 mm x 2,438 mm x 2,896 mm (confirm — 20ft HC standard)

Bund / spill capacity

2,200 L

Internal capacity

35.1 m³ / 1,241 cu ft (as marked)

Max gross weight

12,000 kg / 26,455 lb (as marked)

Tare weight

3,350 kg / 7,385 lb (as marked)

Max payload

8,650 kg / 19,070 lb (as marked)

Rear Door Opening

Height: 2492mm
Width: 2226mm

Side Door Opening

Height: 2497mm
Width: 5702mm

A 20ft ISO-frame steel container for drums, IBCs and chemical packs — with a welded bund under a lift-out galvanised grating floor, and louvred door leaves that keep the air moving through it.

  1. 2,200 L welded bund
  2. 20ft high-cube ISO frame (25G2)
  3. Hot-dip galvanised grating floor
  4. Louvred ventilation, high & low
  5. 4 × adjustable jack legs

Key features

2,200 L welded bund

Seam-welded sump under the full floor area — enough to swallow the complete contents of two 1,000 L IBCs.

Lift-out galvanised grating

Hot-dip galvanised steel grating in removable panels. Spills pass through, cleaning takes minutes, no fixed deck to rot or rust through.

Louvred ventilation, high and low

Slotted louvre banks at both levels of every door leaf — continuous cross-flow to keep vapour concentrations down, angled to shed rain.

Four louvred door leaves

Twin vertical cam-lock bars per leaf, full-height hinges, rubber gasket on the closing faces. Full-width access for forklift and pallet truck.

20ft ISO frame, size code 25G2

Standard 20ft high-cube outline. Corner castings at all eight corners — lifts, stacks and travels like any container.

Fork pockets

Two recessed pockets in the base frame for forklift handling where no crane or spreader is available.

Light interior finish

Interior painted in a light tone so leaks, staining and product residue show up immediately during inspection rounds.